Disconnecting from a computer, Removing the storejet, 5 in windows – Transcend Information STOREJET 2.5 IDE User Manual
Page 13: Me, 2000, xp and vista, 5 in mac, Os 9.0, or later, Remove the storejet, 5 in linux, Kernel 2.4, or later, Use with a computer
11
Disconnecting from a Computer
NEVER disconnect the StoreJet
™
from a Computer when its LED is flashing.
Removing the StoreJet
™
2.5 in Windows
®
Me, 2000, XP and Vista
1. Select the Hardware
icon on the system tray.
2. The Safely Remove Hardware pop-up window will appear. Select it to continue.
Figure 11. Safely Remove Hardware
3. A window will appear stating, “The ‘USB Mass Storage Device’ device can now be safely
removed from the system.”
Figure 12. Safe to Remove Hardware
WARNING! To prevent data loss, always use this procedure to remove the StoreJet
™
from
Windows
®
Me, 2000, XP and Vista.
Removing the StoreJet
™
2.5 in Mac
™
OS 9.0, or Later
Drag and drop the Disk icon that represents your StoreJet
™
2.5 into the trashcan. Then unplug your
StoreJet
™
2.5 from the USB port.
Remove the StoreJet
™
2.5 in Linux
™
Kernel 2.4, or Later
Execute umount /mnt/Storejet to un-mount the device. Then unplug your StoreJet
™
2.5 from the USB
port.
Use with a Computer