Texas Instruments TI-30XS - Manual (Page 3)

Copyright © 2006 Texas Instruments Incorporated 3
Examples
Each section is followed by instructions for keystroke
examples that demonstrate the TI-30XS MultiView™ and
TI-30XB MultiView functions. All references in this manual will
refer to the TI-30XS MultiView, but are also applicable for the
TI-30XB MultiView.
Examples assume all default settings, as shown in the Modes
section.
For more activities and examples, see the TI-30XS
MultiView™ Teacher Guide available at education.ti.com/
guides.
Switching the TI-30XS MultiView calculator on
and off
& turns on the TI-30XS MultiView calculator. % '
turns it off. The display is cleared, but the history, settings,
and memory are retained.
The APD™ (Automatic Power Down™) feature turns off the
TI-30XS MultiView calculator automatically if no key is
pressed for about 5 minutes. Press & after APD. The
display, pending operations, settings, and memory are
retained.
Display contrast
The brightness and contrast of the display can depend on
room lighting, battery freshness, and viewing angle.
To adjust the contrast:
1.
Press and release the % key.
2. Press T (to darken the screen) or U (to lighten the
screen).