Traxxas RUSTLER 3608 - Manual (Page 9)

TR A X X AS • 9
Quick Start: Getting up to Speed
The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on page 4 9. Detail your model • See page 10
For your own safety, understand where carelessness and misuse
could lead to personal injury. Apply other decals if desired.
2. Charge the battery pack • See sidebar, page 12 10. Drive your model • See page 21
Fully charge a battery pack (not included). Charge your battery now
so it will be ready when you finish the other setup procedures. Driving tips and adjustments for your model.
3. Install the antenna • See page 16 11. Maintaining your model • See page 24
Install the antenna mast in the model. Follow these critical steps to maintain the performance
of your model and keep it in excellent running condition.
4. Install batteries in the transmitter • See page 15
The transmitter requires 8 AA alkaline or rechargeable batteries.
5. Install the battery pack in the model • See page 15
Your model requires a fully charged battery pack
(not included).
6. Turn on the radio system • See page 18
Make a habit of turning the transmitter on first, and off last.
7. Check servo operation • See page 18
Make sure the steering servo is working correctly.
8. Range test the radio system • See page 18
Follow this procedure to make sure your radio system works properly
at a distance and that there is no interference from outside sources.
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
Look for the Quick Start
logo at the bottom of
Quick Start pages.