TERK Technologies AM/FM Tower Powered Indoor Antenna - Manual (Page 3)

AM Connections:
AM Push-Button Connection:
Your TERK antenna uses a Twin Lead Bare Wire for
AM connections. If your radio tuner or receiver has a
Push-Button connection, simply slip the bare wires into
the push button connections. For a Screw Terminal
connection, for wrap the bare wires around the screw
terminals and tighten.
See Figs. 2/3.
Power Connection:
Plug the small end of the included power supply into the
jack located on the Slip-On Coaxial connector at the end
of the FM Lead. Plug the large end of the power supply
into any working electrical outlet.
NOTE: When plugged into an electrical outlet, your TERK
antenna will remain “ON”. This is not a problem because
the AC adapter uses very little power. To turn “OFF” the
power supply, it must be plugged into a switched outlet.
Some late model radio tuners and receivers come with a
switched outlet located on the back. It is safe to use this
outlet for the TERK power supply.
TO
WER
2