TP-Link TL-WN651G - Manual (Page 19)

TL-WN610G/TL-WN650G/TL-WN651G 108M Wireless Adapter User Guide
¾ Wireless Mode when Starting an Ad Hoc Network - Specifies Super G or 2.4 GHz
54/11 Mbps to start an Ad Hoc network if no matching network name is found after
scanning all available modes. This mode also allows the selection of the channel the
wireless adapter uses. The channels available depend on the regulatory domain. If
the adapter finds no other ad hoc adapters, the channel that the adapter starts the ad
hoc network with will be selected automatically. The wireless adapter must match the
wireless mode and channel of the clients it associates.
¾ 802.11 Authentication Mode - Select which mode the wireless adapter uses to
authenticate to an access point:
•
Automatic causes the adapter to attempt authentication using shared, but switches it to open
authentication if shared fails.
•
Open System enables an adapter to attempt authentication regardless of its WEP settings. It
will only associate with the access point if the WEP keys on both the adapter and the access
point match.
•
Shared-key only allows the adapter to associate with access points that have the same WEP
key.
For infrastructure (access point) networks, click Preferred APs… to specify up to four
access points to the client adapter that attempts to be associated to the access points.
Figure 3-7 Advanced tab of Profile Management
3.2.2 Remove a profile
1. Go to the Profile Management tab.
2. Select the profile name to remove in the Profiles List.
3. Click Remove.
3.2.3 Switch another Profile
1. Go to the Profile Management tab.
2. Click on the profile name in the Profiles List.
3. Click Activate.
- 14 -