Topcom ORION - Manual (Page 9)

7
Orion
5.7 On hold (music on hold)
1. If you want to put a call on hold, press the Hold button, the
On Hold indicator lights up.
2. When a call has been put on hold, the speaker is activated to
check the line. The waiting correspondent will hear some music.
The microphone is deactivated
3. Put the receiver down when this function is activated.
4. When you want to continue the call, pick up the receiver again.
5.8 Timer
When you are on the phone, press the Timer button to register the
duration of the call (maximum registration time 59 minutes and
59 seconds). If you pick up the receiver and press the Timer button
first, the duration of the last call will be displayed. When you press
the Timer button once more, the unit returns to zero and starts
counting. When you press the Flash button, the timer will stop and
the information shown on the display, will be erased.
5.9. Memory control
The content of each memory number can be checked.
1. Pick up the receiver and press the Semi-handsfree button to take
the line.
2. P ress the Control button : the symbol ’C’ is shown on the display.
3. Enter the desired memory number (direct or indirect) : the first
10 digits of the memory number are displayed. After that you
press a random button (except for the Flash button) and the
remaining 6 digits appear on the display.
4. When the timer is activated, the phone will return to timer mode
after 5 seconds; the timer will restart counting.