TP-Link TD-8840 - Manual (Page 47)

TD-8840 ADSL2+ Modem Router User Guide
41
Figure 4-32
¾ Enable Automatic Assigned Default Gateway - Select this checkbox, and then the Router
will accept the first received default gateway assignment from one of the PPPoA, PPPoE or
MER/DHCP enabled PVC(s). If this checkbox is not selected, you have to enter the static
default gateway and/or an interface. Click Save/Apply to save your configurations.
)
Note:
If changing the Enable Automatic Assigned Default Gateway from unselected to selected, you
must reboot the Router to get the automatic assigned default gateway.
4.3.5.2. Static Route
Choose “Routing→Static Route” menu, you can view and add the Static Route entry in the next
screen as shown in Figure 4-33. A static route is a pre-determined path that network information
must travel to reach a specific host or network.
Figure 4-33