TP-Link TG-3468 - Manual (Page 8)

3
Chapter 2 Installation Guide
2.1 Hardware Installation
To install the adapter, follow these steps listed below:
Step 1: Turn off your computer and remove your computer’s
case cover.
Step 2: Remove the screw that secures the backplate (the small
piece of metal that covers the opening for PCI-E card on
the back panel of your computer), and then remove the
backplate.
Step 3: Carefully insert the adapter into the PCI-E slot. Do not
touch the metal connector on the adapter.
Step 4: Secure the adapter to the case using the screw you
removed from the backplate.
Step 5: Reinstall your computer’s case cover.
Plug in the power cord and other cables, and then turn on your
computer.
2.2 Adapter Driver Installation
For Windows Operating System, please insert the TG-3468 CD
into your CD or DVD driver. Then complete the driver installation
according to the cue on the screen.
For other Operating Systems, please install the driver according
to the Operation System Guider.