SINBO SCM 2917 - Manual (Page 12)

- 11 -
USING YOUR COFFEE MAKER
4) Insert the carafe on keeping warm plate horizontally.
5) Plug the power cord into the outlet.
6) Pressing the switch down, the indicator will be illuminated. The appliance
will begin working.
Note: during brewing process you may remove the carafe to serve for duration
of not exceeding 30 seconds, and the coffee maker can stop dripping
automatically. If the serve time exceeds 30 seconds the coffee will overflow
the funnel.
7) Upon completion of brewing coffee, that is one minute later after the coffee
stops dripping out, you can remove the carafe, pour and serve.
Note: the brewed coffee you get will be slightly less than the water you have
added as some water is absorbed by coffee powder. DO NOT touch cover,
keeping warm plate and so on when operating as they are very hot.
8) When the process is finished, if you do not want to serve immediately, keep
the switch on, the coffee can be kept warm in the keeping warm plate until
the power is cut off manually. For an optimum coffee taste, serve it just after
brewing.
9) Always turn the coffee maker off and disconnect the power supply after
use.
Note: Be careful when pouring the coffee out, otherwise you would be hurt
as the temperature of coffee just finished is high.
CLEANING AND MAINTENANCE
CAUTION: Always unplug the product from electrical outlet and allow the
keeping warm plate to cool completely before cleaning it. Never immerse the
unit or power cord into water or any other liquid for cleaning.
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product’s exterior surface with a soft, damp cloth to remove stains.
3) Water droplets may buildup in the area above the funnel and drip onto the
product base during brewing. To control the dripping, wipe off the area with
a clean, dry cloth after each use of the product.
4) Use a damp cloth to gently wipe the keeping warm plate. Never use abrasive
cleaner to clean it.
5) Replace all parts and keep for next use.