THORENS TD 550 - Manual (Page 28)

Mounting and set-up
Carefully remove the unit and its accessories from the
packaging.
Supplied items:
For the record player‘s mounting and set-up it is
important to observe the following instructions.
1 x plinth (with/without tonearm)
1 x Thorens drive belt
1 x platter
1 x felt mat
1 x power supply with power cord
1 x ground lead
1 x set of RCA interconnecting leads
1 x acryl dust cover
1 x sprit level (bubble)
1 x tonearm balancing gauge
1 x Allen-key SW3
3 x thumb screws for adjusting
1 x adaptor for single records
Put the plinth of the TD 550 onto a level surface as close
as possible to your audio amplifier. You may verify its level
position with the help of the supplied spirit level (bubble).
By means of the three large thumb screws (Fig. 2) on top
of the plinth the unit feet can be adjusted in height.
28
Fig. 2