Toshiba PDR-M60 - Manual (Page 34)

34 Setting up your computer and getting started
5.375 x 8.375 ver 3.1
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
pin connector on the side you insert into the computer.
9 Remove the new memory module from its antistatic
packaging.
10 Insert the memory module into the socket on the
underside of the computer.
Sample inserting the memory module into the slot
11 Hold the memory module by its edges so that the gold
connector bar faces the slot, at a slight angle to the
socket.
Sample inserting the memory module into the socket
12 Check that the module is lined up with the socket clips.
Sample aligning the module in the socket
Charlotte RG.book Page 34 Friday, June 10, 2005 10:26 AM