Top Innovations SF-680 - Manual (Page 9)

C
ARE AND
S
TORAGE
G
UIDELINES
9 Top Innovations, Inc.
PROPER STORAGE
1. Once pressing is complete, immediately turn unit off and unplug power cord
from electrical outlet.
2. Allow unit to cool completely (at least 30 minutes).
3. Lower Pressing Plate down, and turn Locking Knob to “Lock” position.
4. Wrap up power cord and place in Cord Storage Compartment.
5. Store all accessories safely away, preferably near Digital Fabric Steam Press.
6. Store Digital Fabric Steam Press in a cool, dry place.
AUTO SHUT-OFF
The Auto Shut-Off feature of the Digital Fabric Steam Press includes both an
Auto Shut-Off and an Auto Wake-Up. These multiple function safety features
deactivate electrical power to the heater when the Pressing Plate has been left in
closed position against the Ironing Board for more than 10 seconds. Heater
deactivation is signaled by a beeping sound. Heater functionality is restored
when the Pressing Plate is lifted back up.
Power to the heater will also be cut if the Pressing Plate is left in the lifted
position without use for approximately 15 minutes (signaled by a beeping sound
for approximately 22 seconds). After the beeping sound has stopped, the heating
ability of the unit can only be restored in by pressing the Temperature Control
Buttons.
IMPORTANT: Auto Shut-Off does not mean that power to the unit is
totally cut off. Power is always on, and the Power Indicator Light will
remain illuminated until On/Off Switch is set to “Off” position.
CLEANING THE D
IGITAL
F
ABRIC
S
TEAM
P
RESS
1. Place Pressing Cushion in the middle of Ironing Board.
2. Place a clean towel over Pressing Cushion and Ironing Board.
3. Set Temperature Control Buttons to the highest setting (LINEN).
4. When Steam Burst Ready Indicator Light illuminates, lower Pressing Plate
onto Pressing Cushion.
5. Press Steam Burst Button six times.
6. Allow Pressing Plate to cool.
7. Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this
may damage Pressing Plate.
8. Ironing Board fabric cover is removable for cleaning. Hand wash only with
mild detergent.