Topcom CALLMASTER 220 - Manual (Page 22)

Callmaster 220
22
8.1 Warning signal Voice Mail
When this function is activated you will hear a warning signal every
time you receive a voice mail message (beep-beep every minute). The
default setting is OFF.
1. Press and hold the Program/Call button
and then press the
Record button . The display shows “ RESET VXXX”.
2. Press the Program/Call button a few times until you see .
3. Press the Record button to turn the warning signal ON or OFF.
4. Press the Program/Call button to confirm and to leave the menu.
9. Setting the Prefix for incoming calls
This function in only useful when the Callmaster 220 is connected to a
telephone exchange. By setting a prefix, the prefix number will be
added to each incoming number.
To set the prefix, you have to do the following :
- Press and hold the Program/Call button
and then press the
Record button . The display shows “ RESET VXXX”.
- Press the Program/Call button a few times until you see ‘DIAL
PREFIX’ appear on the display.
- Enter the desired Prefix number by using the Up and Down buttons
to select the numbers. Use the Record button to move the
cursor to the right, and the Erase button Ø to delete the last
number and move the cursor to the left!
- Press the Program/Call button to confirm the Prefix number.
HANDL CALLM 220_SCAN 13/3/02 4:42 pm Page 22