TOA Electronics 110SR - Manual (Page 15)

TECHNICAL SPECIFICATIONS ACTIVE MODULE
Frequency Response:
Power Rating:
Maximum SPL (2) 2 1 meter:
Driver Complement:
LF Cutoff (-3 dB):
Inputs:
Outputs:
Protection Limiter:
Input Level:
Lo Pass Filter:
All Pass:
High Pass Filter:
High Pass Output:
High Pass Output Bandwidth
Amplifier Type:
AC Power Requirement:
Power Consumption:
Power Indicator:
(-3dB) 31Hz - 150Hz (-10dB @ 21Hz) - Active Module
(-3dB) 41Hz - 150Hz (-10db @32Hz) - Passive
110 Watts RMS
110dB (Peak)
1 x 10” (254 mm)
31Hz, 6th order tuning, vented box
2 x XLR balanced
2 x XLR balanced
Threshold at onset of clipping
Continuously variable input gain control
Continuously variable 40Hz - 150Hz, 24dB/Octave
31Hz - 300Hz +3dB
Fixed at 80Hz, 12dB/Octave
L/R, unity gain XLR balanced
80Hz - 150 kHz -3dB
Mosfet outputs
110/120 VAC 50/60Hz or 220/240 VAC 50/60Hz
16 Watts at idle
150 Watts at rated power
Front mounted green LED in active mode, “when signal is present or on initial power
up”. Green LED turns to red if signal is not present for more than two minutes
indicating stand-by mode. The sub turns “auto on” when signal is re-introduced.
Want to meet the rest of the family? In addition to our complete family of 110 series subwoofers, Tannoy offers an
extensive range of full frequency loudspeaker solutions suitable for virtually any application.
Marry your subwoofer to any of our ceiling, inwall or surface mount loudspeakers for the complete system that will
enhance the sound quality of all your installations. Like most installers you are probably involved in all aspects of
sound contracting so check out our extensive range of Tannoy all weather, fire rated and sound reinforcement
products. Tannoy delivers solution, effectively and affordably!
Log onto www.tannoy.com for our complete product offering!