Tektronix Phasershare Printer User Manual
Page 32
4
Novell NetWare Configuration
26
PhaserShare Networking
3.
Click Next; the dialogs that follow allow you to configure Bindery
connections, NDS connections, or both. You need to supply the
following information for these connections:
Information needed for Bindery connections
Select either the configuration file server or the preferred file server
from the drop-down list; click Next.
If the file server you want is not on the list, proceed with these steps:
a.
Click File Servers to display the File Servers Browse dialog box.
b.
Select the server you want. Click OK. You are returned to the File
Server Selection
dialog box.
c.
Select either the configuration file server or the preferred file server
from the drop-down list. Click Next.
Create and select a new queue, or select an existing queue. Click Finish.
Information needed for NDS connections
■
Specify the current Directory Services Tree (the tree where the
print server will reside).
■
Specify the current Directory Services Context (the location in the
directory services tree where the print server will reside).
■
Create and select a new queue, or select an existing queue. Click
Finish
.