Tyco American Dynamics VideoEdge IP Box Camera 8200-2646-00 B0 - Manual (Page 59)

Installation and Operation Guide
59
Change the Application Setting —Record Application Enable Setting.
Please follow the steps below to change the setting via the network as necessary.
1. Click on the Enable Record button on the left side of the record to enter the “Record Application
Enable Setting” page.
Record setting page of MJPEG mode Record setting page of MPEG4 mode
2. Click “Enable Record – UPLOAD Via FTP” to checkmark the box and activate the function (*FTP
function is for PAL version only).
3. Click “Enable Record – Save Into SD card” to checkmark the box and activate the function.
4. Click on the Submit button to submit the new setting of the recording.
5. Click on the Home button to return to the home page.
Description of function keys:
Enable Record – Upload Via FTP: Activates or deactivates the recording to the FTP server.
Enable Record – Save Into SD Card: Activates or deactivates the recording to the SD card.