Tascam DP-004 - Manual (Page 20)

20 TASCAM DP-004
2–Quick Start Guides
2 Press the playback ( Á ) key while pressing and
holding the record ( – ) key to start recording.
The track 1 REC key stops blinking and stays lit
constantly.
You are recording. Play your guitar!
3 When you are finished, press the stop ( ª ) key to
stop recording.
4 Press the TRACK 1 REC key again. Its light turns off.
Listening to your recording
1 To go to the beginning of the song, press the Ô
key while pressing and holding the stop ( ª ) key.
(This is the Return To Zero (RTZ) function)
2 Press the playback ( Á ) key to play the recorded
track.
3 Use the track 1 LEVEL knob and the MASTER LEVEL
knob to adjust the playback level. Use the VOLUME
dial to adjust the final monitoring volume.