Toastmaster 1439 User Manual
Page 19
C
OUNTERTOP
F
RYERS
SECTION 3 - OPERATION
17
G. Cleaning
1.
To Prolong Fat Life Strain the Shortening and Clean the Shortening Container (vessel).
Your Toastmaster fry kettle and the shortening used in it will give longer, more profitable service if the following
instructions are observed.
a. Turn the thermostat dial to OFF position.
b. Turn power switch OFF.
c. Turn main disconnect switch “OFF”.
d. IMPORTANT: Allow the shortening to cool.
CAUTION:
Never clean the
shortening
when it is hot.
Let the shortening
cool sufficiently
before any draining
or cleaning
procedures are
followed.
e. Grasping the
swing up handle
raise and hold the
heating elements
halfway up and allow
to drain a few
seconds as shown in
Figure 3- 2. Then
raise the elements
upright and be sure
the locking barhas
automatically locked
in place before
releasing handle as
shown in Figure 3-3.
Toastmaster
®