TP-Link High-Power Wireless USB Adapter TL-WN422G - Manual (Page 23)

TL-WN422G High-Power Wireless USB Adapter User Guide
- - 18
Figure 4-2 More setting
¾ SSID: Enter the SSID of the network. The SSID is a unique name shared among all
points in your wireless network. The SSID must be identical for all points in the
network, and is case-sensitive. Place a check in the any box if you would like the
device to connect to the first available Access Point with the strongest signal.
¾ Network Type: Select a network type from the drop-down list.
¾ Infrastructure or Ad-hoc: If you select infrastructure, the device must be connected
to an Access Point. If you select ad-hoc, you may connect the device to another WLAN
client adapter (such as this one).
¾ Authentication: Select an authentication type from the drop down list. Options
available are: Auto, Open System, Shared Key, WPA, WPA-PSK, WPA2, and
WPA2-PSK.
¾ Encryption: Select an encryption type from the drop-down list. Options available are:
Disable, WEP, TKIP, and AES.
You can click “Change” button to change general connection settings as shown below.