Toshiba ST-7000-C Series - Manual (Page 8)

1. INTRODUCTION EO1-12030
1.1 Accessories
1- 1
1. INTRODUCTION
Thank you for choosing the TOSHIBA POS Terminal. This POS Terminal contains all the high
performance register function necessary for a POS Terminal and enables the user oriented system
configuration. By adopting a high-speed CPU, Memory with large capacity, this POS Terminal flexibly
accepts the modification corresponding to the future system environment as the user expects.
This manual describes the functions and handling of this POS terminal and should be read carefully to
help gain maximum performance and life from your POS terminal. For most queries please refer to
this manual and keep it safe for future reference.
1.1 Accessories
#
Confirm that all the following accessories are contained in the carton. If any accessories are missing
or damaged, contact your TOSHIBA TEC service representative.
Cable Cover (1 pc.) Front Panel Key (2 pcs.) Cable Clamp (2 pcs.)
(Used to secure the USB Cable, etc.
to the POS terminal)
Ferrite Core (2 pcs.) Ferrite Core (1 pc.) Ferrite Core (2 pcs.)
(For the Drawer Cable) (For the Audio Cable) (For the TFT Monitor Cable)
Bind Unify Screw Double Sems Screw
N0.6x4.5 (8 pcs.) M-3x8 (2 pcs.)
(Used to secure the HDDs) (Used to secure the Cable Clamp)
NOTE: The power cord is not included in the carton. Please prepare it separately from a local dealer.
# #
#
# #
#
#
#