Cms501, Dimensional sketches, Supplied accessories – Tannoy CMS501 User Manual
Page 6: Optional accessories, Cms501 pi back can
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
CMS501
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS501 data file // issue 1.06 // 10.01.08
DIMENSIONAL SKETCHES
188.00
[7.40
"
]
288.00
[11.34
"
]
80.00
[3.15
"
]
151.50 [5.96
"
]
151.50 [5.96
"
]
27.00
[1.06
"
]
15.00
[0.59
"
]
16.00 [0.63
"
]
4.50 [0.18
"
]
522.00 [20.55
"
]
81.00
[3.19
"
]
360.00 [14.17
"
]
15.00 [0.59
"
]
635.00 [25.00
"
]
15.00 [0.59
"
]
25 POSITIONS
SUPPLIED ACCESSORIES
C-RING
TILE BRIDGE
OPTIONAL
ACCESSORIES
PLASTER (MUD) RING
60.00
[2.36"]
180.00 [7.09"]
205.00 [8.07"]
230.00 [9.06"]
255.00 [10.04"]
280.00 [11.02"]
305.00 [12.01"]
650.00 [25.59"]
10.00
[0.39"]
188.00 [7.40"]
254.00 [10.00"]
The PI back can accepts direct
connection to installed conduit in two
ways using squeeze connectors:
Any of the three knock-out points at the
side 19mm / 22mm / 28mm
(0.75
"
/ 0.87
"
/ 1.10
"
)
1
2
288.00
[11.34"]
256.00
[10.08"]
8.80
[0.35"]
136.20
[5.36"]
153.5
[6.04"]
186.40
[7.34"]
22mm (0.87
"
) via the clamp location at
the rear after first removing cable clamp
TEMPLATE HOLE CUTOUT SIZE - 190mm (7.50
"
)
CMS501 PI BACK CAN