TP-Link TL-WN620G - Manual (Page 18)

TL-WN620G 108M Wireless USB Adapter User Guide
11
Chapter 3 Configuration
TP-LINK TL-WN620G Wireless USB Adapter can be configured by TP-LINK TL-WN620G
Wireless Client Utility. This section describes how to configure your Wireless USB Adapter for
wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security
encryption features.
After installing the Adapter, the Adapter’s tray icon will appear in your system tray. It
appears at the bottom of the screen, and shows the signal strength using color and the received
signal strength indication (RSSI).
If the icon is gray, there is no connection.
If the icon is red, there is poor signal strength and the RSSI is less than 5dB.
If the icon is yellow, there is poor signal strength and the RSSI is between 5dB and 10dB.
If the icon is green, there is good signal strength and the RSSI is between 10dB and 20dB.
If the icon is green, there is excellent signal strength and the RSSI is more than 20dB.
Double-click the icon and the Current Status screen of TL-WN620G Wireless Client Utility will
appear. From this screen, you can view the strength of the Adapter’s signal and the quality of its
connection. You can also click Advanced to view additional status information about the current
wireless connection. To Edit or add a configuration profile, click the Profile Management tab. To
Display current diagnostics information, click the Diagnostics tab.
You can also run the Utility by clicking the Start>Program>TP-LINK>TL-WN620G> TL-WN620G
Wireless Client Utility. The TL-WN620G Wireless client Utility provides a complete and easy to
use set of tools to:
¾
Display current status information
¾
Edit and add configuration profiles
¾
Display current diagnostics information
The section below introduces these above capabilities.