TP-Link TD-W8900G - Manual (Page 70)

TD-W8900G 54M Wireless ADSL2+ Router User Guide
Figure 4-58
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting
within your network’s RADIUS. To filter wireless users by MAC Address, either permitting or
blocking access. If you do not wish to filter users by MAC Address, select Disabled.
¾ Allow: Click this button to allow wireless access by the devices listed on this screen.
¾ Deny: Click this button to block wireless access from the devices listed on this screen.
¾ Add: Click this button to add the MAC Address.
¾ Remove: Click this button to remove the item of the MAC Address.
When you click the Add button, the picture that shown below will pop-up, and then you can enter
the MAC Address in the MAC Address field.
)
Note:
The form of MAC Address must be “xx:xx:xx:xx:xx:xx”, like “00:13:0A:55:FF:09”.
Figure 4-59
When you finished making changes to the MAC Filter List screen, click the Save/Apply button to
save the changes.
4.5.4 Wireless – Advanced
Choose “Wireless” Æ”Advanced”, you will see the screen of Wireless-Advanced settings shown
as below.
63