Taser IT-INST-TC-001 - Manual (Page 18)

TASER CAM User Manual
IT-INST-TC-001 Rev: C August 28, 2006 Page: 18 of 37
©2006 TASER International, Inc. All rights reserved.
10. You should now see the following screen (Figure 10) indicating your hardware is
installed and ready to be used. Click Finish and follow the TASER CAM
Downloading instructions below to continue the TASER CAM download.
Figure 10
TASER CAM DOWNLOADING
Downloading Video Files from the TASER CAM
Note: The proper software must be installed before video/audio recordings and firing logs
can be downloaded (see TASER CAM PC Software installation).
Note: Because video/audio records are stored in the TASER CAM and firing record data
are stored in the X26 device, remember to download firing records from the weapon before
or after downloading video/audio from the TASER CAM.
1. Connect the TASER CAM to the PC with the USB download cable.
2. Open the TASER CAM PC software. The main screen will appear (Figure 11). Fill in
the operator information.