Tangent CDP-50 - Manual (Page 18)

17
TROUBLESHOOTING
Troubleshooting
PROBLEM CAUSE/REMEDY
No power when unit is turned on. - Switch on the electric current at the socket.
- Check that the plug has been correctly inserted into the
socket.
- The internal fuse has blown and must be replaced by a
qualified service technician.
- The power cord has been damaged and must be
replaced.
No sound. - The unit has not been turned on.
- Incorrect connection to the amplifier.
- No loudspeakers have been connected to the amplifier.
- No CD in the unit.
The unit will not read the disc. - Check if the disc has been turned upside down.
- Check if the disc is clean and undamaged.
- Check if it is a CD or a CD-r.
The unit skips some parts - Check if the disc is clean and undamaged.
during playback. - The unit is positioned on an unstable surface.
A buzzing can be heard. -The RCA cables between the CDP-50 and the
amplifier/receiver have been damaged.
-The RCA cables between the CDP-50 and the
amplifier/receiver have been wound around the power
cord.