TMC EV4500 - Manual (Page 105)

91
Connecting with the Answering System
To connect with the answering
system:
1 Dial your telephone number.
2 When the outgoing message starts
playing, dial the 4-digit remote code.
Note: If you wish to connect to
another phone in the system, dial its
extension number when the auto
attendant answers. Then, when that
phone’s outgoing announcement
starts playing, dial the remote code.
3 Enter the remote commands to
review your messages (see at right).
4 Hang up to end remote operation.
The answering system will automati-
cally disconnect.
You can access many of the features of the
Answering System when you are away from your
phone.
When your OGM starts playing, enter your
Remote Code (see previous page), then enter
the remote commands to access various fea-
tures such as playing your messages (see
below). When you are through, hang up your
phone and the Answering System will automati-
cally disconnect.
Following are the Remote Commands:
Answering System
Remote Operation
=
=
=
=
=
=
=
=
=
= Jump 2 seconds backward
Play
Jump 2 seconds forward
Slow down
Stop
Speed up
Repeat
Skip
Save as New
Erase 1
2
3
4
5
6
7
9
#
*
EV4500 UG combined v52 in PDF order 101005.qxd 10/10/2005 4:54 PM Page 105