TOA Electronics WT-4820 - Manual (Page 5)

5
6. INSTALLING THE WTU-4800 TUNER MODULE
Precautions
• To prevent static damage to internal parts, discharge static electricity from your body and cloth by touching
the equipment rack, the unit's rear, or other metal object before starting the work.
• Turn the power off before installing the tuner module.
• Avoid touching the edge connector of tuner module.
• Do not install the tuner module upside down.
0 10
0 10
AN T A AN T B PE AK VO LU ME
CH AN NEL
TU NER 1
AN T A AN T B PE AK VO LU ME
CH AN NEL
TU NE R 2
ON
OF
F
PO WE R
DI VERSIT
Y W IR ELESS
TUN ER WT -48 20
1
W TU -48 00 TO A C orpo ratio n
ENG INEE RD IN JAP AN ASS EMB LED IN T AIW AN
1 2 3 4 5 6 7
8 9 A B C D E F 0
2
Step 1. Remove the two front mounting screws to detach the front panel.
Step 2. Insert the WTU-4800 tuner module and ensure its connection.
Step 3. Replace the front panel, and fix it with the removed mounting screws.
7. PRECAUTIONS ON ANTENNA INSTALLATION
• Keep the wireless microphone at least 3 m away from the antenna. Using the microphone close to the
antenna may cause malfunction or noise.
• Avoid installing the antenna to or near steel beam, lockers, and other metal objects. Besides, keep it at least
30 cm away from wall surfaces.
• Keep the unit as far away as possible from the following equipment that may generate high-frequency noise:
inverter-driven equipment (such as fluorescent lamps or air-conditioners), digital equipment, and computers.
• Never short antenna cables or the unit's antenna connectors. If they are shorted, the power supply to the
antenna shorts, possibly causing unit's failure.
• Install the antenna and the unit as close as possible to each other to minimize the coaxial cable length.
• Use the optional YW-4500 Antenna when mounting the unit in an equipment rack.
• Install the antenna cable referring to the following type of cable vs. permissible maximum length.
RG-6/U (diameter 8.4 mm): 35 m
RG-11/U (diameter 10.3 mm): 50 m