Tripp Lite 220/380V - Manual (Page 17)

17
LCD Display Navigation
(continued)
“System Control” Sub-Menu
This sub-menu allows you to directly control UPS operation. A password is required to access this sub-menu. Note: The default password is 0 0 0 0.
To change the password, select the “Password Setting” screen in the “Parameter Setting” sub-menu.
A
A
B
B
E
E
F
F
C
C
D
D
Choose “ON” to turn inverter on. Choose “OFF” to turn inverter off. Choose “ON” to allow alarm to sound if the UPS detects a warning or
fault status. Choose “OFF” to suppress this alarm.
Choose “AUTO ON” to manually boost the battery charge. Choose
“MANUAL” to set a time delay for charge boosting. Choose “AUTO
OFF” if you do not want to manually boost the battery charge. Choose “ON” to maintain output. Choose “OFF” to turn off output.
Choose “ON” to initiate a battery self-test. The self test results will be
displayed. Choose “OFF” if you do not want to initiate a battery self-
test. Choose “ON” to manually transfer the load to reserve power. Choose
“OFF” if you do not want to manually transfer the load.
“Event Log” Sub-Menu
This sub-menu allows managers to view up to 500 operational events, listed in order of occurrence.
LCD Navigation Key
Action Buttons to Push
Scroll Up Through Menu
Scroll Down Through Menu
Enter or Select a Menu Choice
Exit Current Menu and Return to Previous Menu
and simultaneously