Toshiba OIS40R User Manual
Page 2
Rev 2003.4.1
SPECIFICATIONS
PROTOCOLS
Power
24 VDC +/-10%, 2 W maximum
Toshiba T-Series PLCs
Keypad IP65
rated
keypad
Toshiba V-Series Integrated Controllers
Temperature
Operating: 0 to 50 degrees C
Storage: -25 to 80 degrees C
Toshiba G7/S9/VF_nC1 ASDs
Modbus
Humidity
10% to 90% (Non condensing)
Special (check with Toshiba)
Bezel Size
101.30 H X 182.50 W, Depth:36.80
mm
Panel cutout
79.00H X 162.00 W mm
Communication
Connects to PLC RS232/R485 port
Immunity to ESD
Level 3 as per IEC1000-4-2
Immunity to Transients Level 3 as per IEC1000-4-4
Radiated Susceptibility Level 3 as per IEC1000-4-3
Emission
EN55011 CISPR A
ORDER NUMBERS
DIMENSIONS
Part Numbers Description
OIS40R
Operator Interface Station.
TKRS485
RS485 Communication Cable T2N) 2m w/ 15
pin D shell & pigtail.
CAB-OIS-T1-X
RS232 Communication Cable 2m w/ 8 pin
mini DIN & 9 pin D-shell (T1)
CAB-OIS-T2-X
RS232 Communication Cable (T2E/T2N/T3)
9830
Beldon RS485 Cable (or equivalent)
Communications Cable 24 AWG low
capacitance (T1, T2E, V-Series)
26-117B
RadioShack RS232 Programming Cable
(or equivalent), 9 pin D shell (male & female)
Note: The OIS40R has a 9 pin D shell female connector for connection to the PLC. This connector can be setup as either
RS485 or RS232. For RS485 connection, one end of the Beldon 9830 cable must be terminated with a 9 pin D shell (male)
connector.
ADJUSTABLE SPEED DRIVES MOTORS CONTROLS UPS INSTRUMENTATION PLC DCS
13131 West Little York Rd Houston, TX 77041
Ph: 713-466-0277 Fax: 713-466-8773
US: 800-231-1412 Canada: 800-872-2192 Mexico: 001-800-527-1204
Email:
Website:
www.tic.toshiba.com
Available Through: