Toshiba Strata DK 2000-series - Manual (Page 69)

Features
Message Waiting
Strata DK Digital Telephone 6/00
57
Message Waiting
If you call a busy station [DN] or its user does not answer, you can leave a message
waiting indication at the station. The Msg LED at the called station flashes and the
user can call you back by pressing the
0VJ button with the flashing LED. (Voice mail
devices, as well as people, can leave message waiting indications.)
All telephones have a standard (fixed) 0VJ button/LED for receiving/retrieving
messages left by callers that called the station’s [PDN]. Telephones that own [PhDNs]
can also have up to four additional (flexible) message waiting [PhDN/MW] buttons/
LEDs for receiving/retrieving messages left by callers that called the respective
[PhDNs]. To use the [PhDN] message waiting feature, your telephone needs to have
[PhDN/MWs].
Up to four message waiting indications and LCD messages can be left at each [DN] or
[PhDN] at one time. The fourth message and one of the LEDs is reserved for the
Message Center.
Message Waiting Light on [PDN]
➤
To answer a Msg light
5. Press 6WDUW . The dialed digits will not be sent until you press this
button or until the timer expires.
1. Press 0VJ , then lift
the handset.
If you reach a station
that is busy or does
not answer, go on-
hook and press
0VJ
again. The system
rotates to the next
message sender.
Your phone rings the station or voice mail device that
set the indication. The LED continues to flash red.