Charging the battery pack, Installation – Toshiba FT-8901 User Manual

Page 12

Advertising
background image

Preparation

CHARGING THE BATTERY PACK

It is important to charge the battery for 12 to 16 hours
continuously without any interruption before you use the handset
for the first time.

1

Remove the battery cover on the
back of the handset by sliding it
down.

2

Plug the battery pack cord into the
connector with the correct polarity.
(black and red wires).

3

Place the battery pack in the battery
compartment.

4

Put the battery cover back by
sliding until it snaps into place.
Make sure not to get the wires of
the battery pack caught in the
cover.

5

Place the handset on the base unit.
Be sure the CHARGE LED lights.
If the CHARGE LED does not light,
make sure the AC adaptor is
plugged in securely.

NOTES:

• Use only the supplied battery pack (TRB-8000 power source 600mAh, 3.6VDC)
• The battery pack is not charged properly if the charging contacts are dirty or

tarnished. Clean the contacts occasionally with a dry cloth.

12

INSTALLATION

Red

Black

TALK

BATT LOW

CHARGE
LED

Charging contacts

TALK/BATT LOW
LED

POWER
LED

FT-8901.qx 1/5/1 11:28 AM Page 12

Advertising