Toshiba 14AF41 - Manual (Page 24)

22
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, press MUTE again.
Selecting stereo/SAP broadcasts
You can enjoy watching TV while you listen to high-fidelity stereo
sound with the Multi-channel TV Sound (MTS) feature. MTS can also
transmit a second audio program (SAP) containing a second language
or other audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on the screen when the TV is on, you change the
channel, or press the RECALL button.
The MTS feature is not available while in the VIDEO mode.
When you are watching a stereo broadcast, the word STEREO is
displayed in light blue. You should leave your TV set to STEREO so
you can automatically receive stereo or monaural sound, depending on
the broadcast type. If the stereo sound is noisy, select MONO to
reduce the noise. The word STEREO or SAP is displayed in light blue
when the TV receives the signal.
To select desired sound
Press the MTS button to select the desired sound.
Using the
TV
’s
Features
MONO+SAP broadcasting
SAP SOUND
MAIN SOUND
(MONO)
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(STEREO)
STEREO+SAP broadcasting
MAIN + SAP SOUND
(MONO)
MAIN SOUND
(MONO)
SAP SOUND
POWER
1 2 3
4 5 6
7 8 9 0
TV VCR CABLE
CH RTN
ENT
100
CH +
CH –
FAV EXIT RECALL TV/VIDEO
CODE MTS SLEEP MUTE
RESET CAP/TEXT 1/2
MENU/
ENTER
VOL
FAV
VOL
+ –
Recall
Mute
MTS
3J70201B P22-BACK 28/5/01, 2:25 PM 22