Overview, Features, Installation – Tripp Lite Console Converter For SUN B011-000 User Manual
Page 2: Dip switch settings, Leds, Specifications
Overview
The B011-000 PS/2 to SUN interface converter allows you to
control a SUN workstation from a PS/2 keyboard, PS/2 mouse
and PC monitor by translating their signals to SUN keyboard,
mouse, and monitor signals. In addition, the B011-000 fully sup-
ports Tripp Lite’s existing KVM switches, so you can use them to
easily integrate SUN workstations into your KVM network.
Features
M
Hot Plug Support for PS/2 Keyboard and Mouse
M
DIP Switch Selectable Display Resolution
M
DIP Switch Selectable Screen Saver
M
DIP Switch Selectable Mouse Speed
M
No Power Adapter Necessary
Installation
1. Plug the cables from your PS/2 keyboard and PS/2 mouse
into the mini-DIN 6 pin connectors on the Console side of the
B011-000.
Note: 1. The mouse used with a SUN workstation is a three
button mouse. Use a three button PS/2 mouse to
fully emulate its functions.
2. If connecting to a KVM switch, use a PS/2 KVM
cable kit to connect the B011-000 to your switch.
2. Plug the cable from your PC monitor into the HD15 connector
on the Console side of the B011-000.
3. Use a 13W3 male-to-male cable to connect the SUN
workstation’s Video Out port to the B011-000’s Video In port.
4. Use an MD8 male-to-male and PIN to PIN cable to connect
the SUN workstation’s keyboard and mouse port to the
B011-000’s keyboard and mouse port.
DIP Switch Settings
Select the video resolution, the amount of idle time before the
screen saver comes on, and the mouse speed with the DIP
switch as follows:
Video Resolution
SW1
SW2
SW3
1152 x 900 (76Hz)
ON
OFF
OFF
1152 x 900 (76Hz)
ON
ON
OFF
1152 x 900 (66Hz)
OFF
OFF
ON
1280 x 1024 (76Hz)
ON
OFF
ON
1600 x 1280 (76Hz)
OFF
ON
ON
Screen Saver Time Out
SW4
SW5
SW6
5 Minutes
OFF
ON
ON
10 Minutes
OFF
OFF
ON
20 Minutes
OFF
ON
OFF
30 Minutes
OFF
OFF
OFF
Monitor Always ON
ON
X
X
Mouse Speed
SW7
High
ON
Normal
OFF
LEDs
There are three LEDs to indicate operating status:
M
The ACTIVE LED indicates that PS/2 keyboard or mouse
data is being transmitted.
M
The EXTEND LED indicates that the Right Control key (RCtrl)
is active.
M
The COMPOSE LED indicates that the Compose key is latched.
Specifications
Function
Specification
Power Consumption
50mA (max)
Connectors
Video In
13W3 Female
Video Out
HD15 Female
Sun KB & Mouse
Mini DIN 8 Pin Female
PS/2 KB
Mini DIN 6 Pin Female
PS/2 Mouse
Mini DIN 6 Pin Female
LEDs
Active
Green
Extend
Yellow
Compose
Yellow
DIP Switch
8 bits
Operating Temperature
5 ~ 40
o
C
Storage Temperature
-20 ~ 60
o
C
Humidity
0 ~ 80% (RH)
Housing
Plastic
Weight
150g
Dimensions (L x W x H)
100 x 80 x 36 mm
- 2 -
- 1 -
- 3 -
SUN Station
B011-000
B010-000
KVM Switch
MAC
PC
B011-000
SUN Station
LEDs
MD8
13W3
DIP SW