Thermador MT27 - Manual (Page 12)

M Oven
Page 10
Keep Warm Pad
Microwave Operation
This feature helps you to keep a certain selection of foods
warm for 30 minutes after cooking. (Gravy, Stew or Dessert)
1.
Display Window
NOTES:
1. To use with other power levels, Press Power Level, then
Quick Min.
2. If you use Quick Min, you can not use the Number Pads
or vice versa.
3. Press Quick Min to add more time during cooking. To
verify the additional cooking time, check the Display
Window.
Keep
Warm
“GRAVY— PRESS SERV/
WEIGHT’ appears in
Display Window.
Serv / Weight
Press once for Gravy
➞
Select number 1 for 1 cup
Select number 2 for 2 cups
Press twice for Stew
➞
Select number 1 for 1 cup
Select number 2 for 2 cups
Select number 3 for 3 cups
Select number 4 for 4 cups
Select number 3 for 3 servings
Select number 4 for 4 servings
Press three times
➞
Select number 3 for 3 cups
for Dessert Select number 4 for 4 cups
2.
Press twice.
3.
At the end of cooking, five beeps
sound and “ENJOY YOUR MEAL”
appears in the Display Window.
Keep Warm time appears
in Display Window and
begins to count down
from 30 minutes.
Verify serving size (3-4)
in Display Window.
Press.
Start
Serving
Weight
Quick Min
To Set Cooking Time:
Example: 5 minutes
1.
2.
Display Window
Set cooking time.
Power level is
P100 (HIGH).
Cooking begins and
time counts down.
Power level arrow
begins to scroll.
At the end of cooking, five beeps sound
and “ENJOY YOUR MEAL” appears in
the Display Window
Press.
(up to 10)
Quick
Min
Start
This feature allows you to set and/or add cooking times easily
in multiples of one minute.
Let's Start to
Use The Oven!
Clock
This feature allows you to display the time of day.
The oven will operate without setting the clock.
Example: To set 12:34 AM or PM. Display Window
1.
Press.
2.
3.
NOTES:
1. To reset the clock, repeat step 1 through 3.
2. The Clock will retain the time of day as long as electric-
ity is supplied.
3. Clock is a 12 hour display.
4. Oven will not operate while colon is flashing.
Press Clock again
to set time of day.
Colon appears
and flashes.
Colon continues
flashing.
“PRESS CLOCK PAD”
scrolls across
Display Window.
“SET TlME”scrolls across
Display Window.
Enter time of day using
number pads.
Clock
Clock
Colon stops
flashing.
1. Plug into a properly grounded electrical outlet.
Display Window
“WELCOME TO THERMADOR
REFER TO OPERATING
INSTRUCTIONS BEFORE USE ”
scrolls across Display Window.
2. The messages in the Display Window automati-
cally appear in English.
If you wish to use Spanish or French, use the
Function pad language option.
If you wish to use metric measurements, use the
Function pad weight option.
WELCOM