Triax SR 322 - Manual (Page 16)

3.1 Basic Function Usage
3.1.11 To change the audio output
• Press the A.L/R button on the remote control unit to change the
output.
• Then on-screen menu is displayed on the top right side of the screen.
• Press the A.L/R button repeatedly to change the sound mode.
(Mono, Left, Right, Stereo)
3.1.12 PIP
The PIP (Picture-in-Picture) function allows you to watch two screens
at the same time. With the PIP function, you can move the PIP screen
or freely adjust the screen size.
• If you press the PIP button while the channel is showing on the
screen, the PIP will be shown at the top left of the screen.
• If you press the PIP CH button, the PIP Simple Channel List will
appear on the screen.
• Press the UP/DOWN button on the PIP Simple Channel List screen to
select a channel, and press the OK button.
• Press the MODE button and press the UP/DOWN/LEFT/RIGHT button
to change the location of the PIP screen.
• Press the MODE button once again and press the the UP/DOWN
/LEFT/RIGHT button to change the size of the PIP screen.
• If you press the MODE button once again, you can see the screen as
a multi-media window type. The main screen will be displayed on the
left, and the PIP screen on the right side of the screen, as a multi-
media window type.
• Press the SWAP button to swap the main screen for the PIP screen,
while the PIP screen is showing.
3.1.13 Recall List
Recall List is to show the previous channels (up to 10 channels).
• If you press the RECALL on the screen, the Recall List Pop-up
window will appear.
• Press the UP/DOWN button to select the channel and then press the
OK button. The changed channel will be shown with the channel
banner.
3.1.14 DISPLAY Setting
This mode changes settings such as the TV Type, RF Channel, and
RF Mode.
If you press the DISPLAY button, the A/V Settings screen of the
System Setting menu will appear. Change the settings on the screen.
16