TMIO PS302SS01 - Manual (Page 8)

 Designed and manufactured in the USA with pride by TMIO, LLC • Chattanooga, TN • US toll-free +1.800.881.TMIO (8646) • www.tmio.com
Connect Io TM , Intelligent Oven TM , Intelligent Ovens TM , Green Clean TM , and TMIO ® are registered trademarks of TMIO, LLC.
j
Remove the oven door before lifting the oven
into the cabinet. This will reduce the weight of the
oven and avoid serious damage if the handles are
used to lift the unit.
See “Door Removal” .
k
Before lifting the product, remove oven door,
wire racks, oven trays, broiler pan, wine glasses, and
all cardboard packaging from both oven cavities.
STEP . Removing Oven Doors
INSTALLATION STEPS
i
DOOR REMOVAL: Remove door before installing the oven to ensure handle/oven door are
NOT used to lift oven.
• Squarely facing the front of
the oven, firmly grasp each
side of the oven door near
the handle. Begin closing
the door to nearly upright.
When door stops closing, lift
up the door slightly and pull
out, swinging the bottom of
the door out towards you.
• Place door on a protective
surface to prevent scratches
on the door surface.
i
• Open the door fully.
• In both back corners of
the door you will see door
catches in the locked
position. Rotate the top
of the catches on both
hinges fully towards you
until the catches stop.
Door hinge
in locked
position
Hand grip position
for lower door Hand grip position
for upper door
Door hinge
in unlocked
position