TechniSat DIGITY 1 - Manual (Page 27)

> Use the
arrow up/down keys to mark the line Search.
> Confirm by pressing OK.
The sub-menu >Search will be displayed.
> Now use the
arrow up/down keys to select the search method you wish to
employ.
7.4.1 Satellite
When you activate this search mode, all active satellites (Point 5.4) and transponders will be
scanned for programmes.
>
Use the arrow up/down keys to select the menu line Satellite.
> Press the OK key to display the sub-menu.
> Press the
OK key again in order to display the table for the active satellite.
> Use the arrow up/down keys to mark the line All, in order to scan all active
satellites for programmes, or select a specific satellite in order to search for program-
mes only from that source.
> Choose by pressing the green function key whether you want so search only for fre-
ely available programmes ( Search all free) or whether you also want to search for
encrypted programmes (
Search all).
> Confirm by pressing the red function key (“Start search”).
The scan will commence. Please note further information that appears on screen.
27
bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 27