TRENDnet TE100-P21 - Manual (Page 18)

- 18 -
- Change IP Address:
Click this button to
bring up the following
dialog box, allowing
you to change the IP
Address. In this dialog
box, you can select
either Manually Assign
or DHCP Assign
Automatically. When
completed, click OK.
- Factory Reset: Click this button to reload the factory settings
of the print server.
- Show Web Setup: Click this button to open your web
browser and launch the Configuration Utility. Alternately,
you can double-click the print server in the Device List to
launch the Configuration Utility.
- Discover Device: Click this button to search the connected
print server again.
- About: Click this button to bring up a window containing the
basic information of PS-Utility.
- Close: Click this button to exit PS-Utility.
3. Information Field: Display the basic information of the selected
print server in the Device List.
4. Status Bar: Display the system status.