TERK Technologies TERK TV36 - Manual (Page 3)

Antenna Assembly
TV36
4
Antenna Assembly
(continued)
1. Unfold the elements on the two reflector booms until they lock
into place. Make sure that they are straight and perpendicular to
the boom.
2. Attach the two reflector booms using the attached nut and bolt so
that they are perpendicular to the smaller boom. (See figure 1.)
3. Unfold the reflector booms until they lock into place.
(See figure 2.)
4. Unfold all the other elements on the antenna until they lock into
place ensuring that they are flat and parallel to each other. (See
figure 3.)
TV36
Fig. 3
Fig. 1
Fig. 2
Large Boom
Small Boom
Mast
Reflector Booms
3
T0436-TV36 Revise-OM.qxp 11/11/03 03:53 AM Page 3