Toshiba DVD Video Recorder / Video Cassette Recorder D-VR610KU - Manual (Page 24)

24 EN 24 EN
CONNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the owner’s manual accompanying external devices for more information.
Note
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
DVD DIGITAL AUDIO OUT AUDIO OUT S-VIDEO
OUT IN COAXIAL
L
R
L Y
PB
/CB
PR
/CR
R
L
R
S-VIDEO IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
COMPONENT VIDEO OUT
DVD/VCR
HDMI OUT
AUDIO IN
L R
IN
L
R
S-VIDEO IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
DVD/VCR DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO
OUT
COAXIAL
L
R
Y
P B
/C B
P R
/C R
COMPONENT
VIDEO OUT
DVD DIGITAL AUDIO OUT AUDIO OUT S-VIDEO
OUT IN COAXIAL L
R
L Y
PB
/CB
PR
/CR
R
L
R
S-VIDEO IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
COMPONENT VIDEO OUT
DVD/VCR
HDMI OUT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO
OUT
COAXIAL
L
R
Y
P B
/C B
P R
/C R
COMPONENT
VIDEO OUT
COAXIAL
DVD
*MD deck or DAT deck can be also connected through coaxial jack.
stereo system
audio
analog audio
input jacks
RCA audio cable
AUDIO OUT
2 Channel Analog Audio Connection Digital Audio Connection
Dolby Digital decoder
digital audio
coaxial input
jack
digital audio
coaxial cable
DIGITAL AUDIO OUT
this unit
or
Multi Channel Digital Audio Setting
Setting Setup >General Setting >Playback >Audio Out >
Connection Dolby Digital DTS
If output is Dolby Digital encoded audio, connect to
a Dolby Digital decoder.
Stream OFF
If output is DTS encoded audio, connect to a DTS
decoder.
PCM ON
If output is encoded audio for both Dolby Digital and
DTS, connect to the decoder which encodes multiple
audio sources.
Stream ON
Connecting to an MD deck or DAT deck. PCM OFF
If not connected to any external devices. PCM OFF
* To complete these settings, refer to page 89.
E9KGAUD_D-VR610KU_EN.indd 24 E9KGAUD_D-VR610KU_EN.indd 24 2007/12/18 17:09:49 2007/12/18 17:09:49