Toshiba CD332 User Manual
Page 27
Advertising
User’s
Manual
23
5. Programming
c
At the first scan, initializes the status of the CD332.
− Important
d
End of the main program
e
Resets the interrupt flag and confirms the interrupt factor.
− Important
f
Processing program for each interrupt factor
(Subroutine call can also be used)
g
End of the interrupt program
NOTE
When the Direct I/O instruction for the CD332 is executed, the internal
interrupt flag of the CD332 is reset. Therefore, do not use the Direct I/O
instruction for the CD332 on the main program, except
c
above.
Advertising