Toshiba Strata DK280 - Manual (Page 15)

2. When Call Is
Answered
3.
Hold
Transferred CO call---CO line is transferred to your station in the ringing state
another station.
Camped-on CO call-CO line was camped-on to your busy station and rings
your station when you hang up.
The display changes to indicate calling status.
H O L D L I N E
J A N S U N You have put a CO line call on hold at your station.
4. Hold Recall
Held call automatically recalls your station after a programmed period of time.
5. Outgoing
N O . N N N
U S I N G L I N E 6
6. CO Line Queuing
(Callback)
L I N E 3 A C E
Date/Time:
N O . N N N
M A Y 2 4 M O N
Dialed Number:
CO Line
N O . N N N
5 5 5 1 3 7 4
2. intercom
N N N
2 0 1 I
When you manually select a CO line, it is displayed. This display is replaced by
the dialed number as you dial.
When the CO line queuing feature rings back to your an available
CO line, that line number will be displayed.
1. Press the Page button to display date/time when talking on a Central Office
(CO) line (Soft Keys must be off before the call is started).
2. The date/time is adjusted on a system-wide basis by the station located in
port 00 (usually station 200).
The digits are displayed as you dial over either a Central Office (CO) line or the
intercom using:
n Manual dialing
n Automatic dialing
Repeat last number dialed
n Saved number redial
NOTE:
If you are calling on a CO line, the display will automatically change from dialed
number to elapsed time after a programmed period of time.