TP-Link TL-POE200 - Manual (Page 9)

4
)
Note:
TL-POE200 Power over Ethernet Kit is not compliant with IEEE
802.3af standard. The TL-POE200A (PoE Injector) and
TL-POE200B (PoE Splitter) can only be operated together.
Pairing the devices with any other PoE adapter is dangerous.
Chapter 3 Connecting the Power over Ethernet
Adapter Kit
This chapter gives instructions on how to connect the Power
over Ethernet Adapter Kit. Once connected, the Kit will
transmit data and power over the Ethernet network cable to your
remotely located network device.
To connect the Power over Ethernet Adapter Kit, please take the
following steps.
LAN OUT: Connect to
the Ethernet device
with CAT5 UTP cable
to transmit data. DC OUT: Connect to the
power port of the Ethernet
device with the provided
power cable to supply the
power of 5V, 9V or 12V DC.
PWR: Power LED, a steady green light indicates
that the PoE Injector can supply power.