Tekkeon ET6000 - Manual (Page 9)

7 USER GUIDE
Using ezSpeak
Powering ezSpeak
To Turn On ezSpeak
1. Press and hold approximately two seconds until the display lights up and “ET6000” appears
on the display.
NOTE: To conserve power, the display will turn off after being idle for approximately eight seconds.
To view the display, simply press
.
To Turn Off ezSpeak
1. Press and hold approximately four seconds until “Power Off” appears on the display and
ezSpeak turns off.
Making Calls
You can make calls from your mobile phone, or directly from ezSpeak using the last number redial
feature, voice dialing commands, or the stored number redial feature.
NOTE: ezSpeak must be connected with the paired phone (the phone name appears in the display).
If ET6000 is displayed instead of the phone name, you must connect to ezSpeak before making a call.
To Make Calls from Your Mobile Phone
1. Dial the number from your mobile phone. The call is automatically connected to your ezSpeak.
To Make Calls Using Last Number Redial (if supported by your mobile phone )
1. Press twice quickly to redial the last number dialed from your mobile phone. The number is
called, and “Redial, and then “Calling” appear on the display.
et6000_ug_fnl 10/26/06 4:17 PM Page 7