Topcom BUTLER 2450 - Manual (Page 158)

158
• Press a few times on or keys to set the first number of the VIP code.
• Press the de key to confirm the first number. The internal voice says the current set
2nd digit of the VIP code.
• Press a few times on or keys to set the second digit of the VIP code.
• Press the key to confirm the second number. The internal voice says the current set
3rd digit of the VIP code.
• Press a few times on or keys to set the third digit of the VIP code.
• Press the de key to confirm the VIP code. You will hear a long beep. The internal
voice says the new VIP code for confirmation.
Note: If you do not press any keys for 8 seconds, the previous VIP code is saved and the machine
automatically exits the VIP setting mode.
7.9.2 Checking the VIP Code
• Press the key to play the VIP code. The internal voice says the current VIP code.
7.10 Operation
If a call is received and the answering machine is turned on, the answering machine will auto-
matically pick up the line after the set number of rings. If
• outgoing message 1 has been selected, it will be played. After the outgoing message, a beep
will be heard and the caller can leave a message (of a max. 3 minutes).
• Outgoing message 2 has been selected, it will be played. After the beep, the line will
automatically be disconnected. The caller does not have the possibility to leave a message.
Note: If, during pick-up, nothing is said for 8 seconds, the line will be automatically disconnected.
7.11 Recording a Memo
With the Butler 2450, you can record memos. These memos are considered an incoming
message that can be picked up later by the user. The max. recording time for a memo is
2 minutes.
• Press the
key for 2 seconds. After the beep, say your memo.
• Press the Stop -key to stop recording.
7.12 Playback of Incoming Messages and Memos
• Press the key to play the messages and memos.
• An internal message tells you how many messages there are (total) and how many new
(unheard) messages.
• The messages are played one at a time. If there are new messages, only the new messages
(those that have not been heard) are played.
• For each message, the internal voice says the day and time the message was recorded
• During playback, you can:
- go to the beginning of the current message by pressing the key once.
- go to the previous message by pressing the key twice.
- stop playback by pressing the Stop key .
Butler 2450
HANDL. B2450_scan.qxd 03-09-2002 17:05 Page 158