TANDBERG 1700 MXP - Manual (Page 84)

D 13954.01
MAY 2006 8
TANDBERG 1700 MXP
USER GUIDE
PC SoftPresenter and VNC
Control Panel > Presentation Settings
About PC SoftPresenter
PC SoftPresenter is used to display PC images on your sys-
tem without using a VGA cable (PC Presenter). The system
and your PC must be connected to the same LAN. In addi-
tion, VNC (Virtual Network Computing) server software must
be installed on the PC. Free software can be downloaded
from
http://www.realvnc.com . Install the software by running
the downloaded file.
This is an optional feature – contact your TANDBERG Repre-
sentative for details.
Configuring the VNC Server Software:
Select the following to setup VNC; Windows-Start\All Pro-
grams\Highlight RealVNC\Hightlight VNC Server\Show User
Properties
Select Accept Socket Connections.
Select
Auto for Display Number. Display Number in the sys-
tem must then have the value 0.
Enter a password in the Password-field. This must corre-
spond with the VNC Settings on your system.
Showing PC Contents Using the PC Soft Presenter & VNC
Start the VNC software on your PC.
To use VNC, you must configure VNC Settings. Open
VNC
Settings in the Presentation Settings menu (see previous
page for details).
Fill in the IP address of your PC, Display Number and Pass-
word.
Press
Save .
When you now choose VNC as video source in the Presenta-
tion menu, you will see your PC using VNC. If a PowerPoint
presentation is being displayed then you can scroll through
the presentation by pressing the
Vertical Arrow keys on the
remote control. VNC settings will go back to default when
the system goes to standby.