Tricity Bendix SI 535 - Manual (Page 30)

CLEANING THE GRILL DEFLECTOR,
GRILL PAN, GRILL PAN GRID, OVEN
SHELVES AND WIREWORK SIDE
RUNNERS
All removable parts are dishwashable. Alternatively,
soak them in hot soapy water if they are heavily
soiled they will then clean more easily.
The grill deflector, grill pan, meat tin and trivet can be
cleaned using a soap impregnated steel wool pad.
The grill pan grid, oven shelves and wirework side
runners should be cleaned using hot soapy water.
Soaking first will make cleaning easier.
NOTE: The grill pan handle should not be cleaned in
the dishwasher.
CLEANING INSIDE THE OVEN/GRILL
COMPARTMENTS
The main and second oven compartments are
coated with a Stayclean finish.
The Stayclean surfaces inside the ovens should not
be cleaned manually. See Page 31 'Care of
Stayclean Surfaces'.
The vitreous enamel oven base can be cleaned
using normal oven cleaners or aerosol oven cleaners
with care. Ensure that the manufacturers
instructions are followed and that all parts are well
rinsed afterwards.
Aerosol cleaners must not be used on Stayclean
surfaces and must not come into contact with
the elements or the door seal as this may cause
damage.
CLEANING BETWEEN THE OUTER AND
INNER DOOR GLASS
The outer door glass is removable for cleaning.
TO REMOVE THE OUTER GLASS
1. Open the oven door slightly to gain access to the
two cross head screws on the top of the oven
door.
2. Loosen the two screws using a Pozidrive
screwdriver.
3. Hold the door glass securely in place with one
hand before removing the screws completely with
the other hand.
4. Using both hands, gently tilt the top of the door
glass towards you. Lift slightly to disengage the
locators from the two bottom brackets.
5. Clean the outer and inner glass using hot soapy
water or Hob Brite cleaner may be used. DO
NOT try to clean the aluminium foil which is
inside the door. The foil is there to help keep the
door cool, if it is damaged it will not work.
Ensure that all parts are well rinsed and
thoroughly dry before attempting to replace the
outer door.
TO REPLACE THE OUTER GLASS
1. Holding the oven glass with both hands, gently
place the locators into the holes of the brackets
at the bottom of the oven door.
2. Push the top of the oven glass towards the oven
door, ensuring the screw location holes line up.
3. Hold the glass in place with one hand and insert
the cross head screws into the location holes
with the other hand. Give the screws one turn to
ensure the glass is secure.
4. Tighten the screws positively with a Pozidrive
screwdriver before closing the oven door.
Do not attempt to use the oven without the glass
being in place.
TO CLEAN INSIDE THE INNER GLASS DOOR
The inner glass door is not removable. Clean using
hot soapy water or Hob Brite Cleaner and a soft
cloth. Take care NOT to use abrasives as they
damage the glass or seal.
30