Tapco Mix.120 - Manual (Page 14)

14
upon the position of the TAPE TO CTRL RM/
PHONES (16) switch and the FX TO CTRL ROOM
(17) switch.
Note: Be very careful because
the PHONES jack can drive any
standard headphones to very
loud levels. Please see page 2 for
information on hearing protection.
See Appendix B for information
about 1/4" TRS stereo connectors.
REAR PANEL FEATURES
29. POWER IN
This connection is where you connect the supplied
external AC power supply to provide AC power to
the mixer. Connect the external power supply to the
MIX Series mixer fi rst, then plug the power supply
into a suitable and properly rated AC outlet.
WARNING: Make sure you use the correct
external power supply capable of providing 18.5
VACx2 at 150 milliamps.
30. Kensington Security Slot
To help prevent theft, all the MIX Series mixers have
a security slot designed to fi t the popular Kensington
security locks. A variety of models are available from
their website at www.kensington.com.
POWE POWER
29
30