Getting started, 12 docking an ipod to this system, Compatible ipod software – Teac SR-LX5i User Manual

Page 10

Advertising
background image

10

Getting Started

The SR-LX5i comes mounted with an
adapter “60GB (color) + Photo 40/60GB”.
To play your iPod through the SR-LX5i, you
have first to check if the factory mounted
adapter fits your model of iPod. If it does
not, you have to replace it with a correct
one, as explained below.

1. Remove the adapter from the Dock

of the SR-LX5i.

Hold the left and right sides of the
adapter and gently pull it up.

2. Choose the Dock adapter that fits

your iPod mobile digital device.

<

Use a commercially available adapter to
play iPod with dock connector.

3. Insert the adapter into the Dock of

the SR-LX5i.

Fit the front edge of the adapter into the
Dock, and then press the back edge of
the adapter onto the Dock until a slight
“click” is heard indicating the adapter is
inserted correctly.

1

2

Docking an iPod to this system

iPod video output

Make the following settings on your
iPod’s menu to output video to a TV via
this system’s dock.
In the [Video] menu, select [Video
Settings]. Set [TV OUT] to [On] or [Ask].
If you have set [TV OUT] to [Ask], your
iPod prompts you each time you play a
video to specify whether to output it to a
TV.

Note:

If you output video to a TV from your
iPod, the video is not displayed on the
iPod’s screen.
iPod touch does not contain this menu.
You will have to specify whether to a
output video to a TV each time you play it.

Using the alarm on your iPod touch

If you specify [Slide to power off] on your
iPod touch, you cannot use the alarm
even if the iPod touch is docked to this
system.
To use the alarm on your iPod touch, do
not select [Slide to power off]. (The
screen can be turned off without any
problem.)
If Video is displayed on your iPod touch’s
screen, you cannot use the alarm even if
the iPod touch is docked to this system.
To use the alarm on your iPod touch,
select any item other than Video.

Compatible iPod Software

In case your iPod will not work with the
SR-LX5i or with the remote control unit,
software update may solve the problem.
Visit the Apple website and download
the latest iPod Software.

http://www.apple.com/ipod/download/

<

When you need to remove the adapter,
hold the left and right sides of the
adapter and gently pull it up.

Advertising