Tandy CHRONOMATIC 308 - Manual (Page 3)

3
Note: The PM indicator on the
display lights when you set the
time to a PM hour.
2. While holding down TIME , repeat-
edly press (or press and hold
down)
MINUTE until the clock dis-
plays the correct minute.
3. Release TIME when you have set
the correct time.
Setting the Alarm
1. While holding down ALARM ,
repeatedly press (or press and
hold down)
HOUR until the clock
displays the correct hour.
Note: The PM indicator on the
display lights when you set the
time to a PM hour.
2. While holding down ALARM ,
repeatedly press (or press and
hold down)
MINUTE until the clock
displays the correct minute.
3. Release ALARM when you have
set the correct alarm time.
To view the alarm time, hold down
ALARM on the top of the clock radio.
Using the Alarm
Once you set the alarm time, follow
these steps to turn on the alarm.
1. Set ON/OFF/AUTO/ALARM to
AUTO to turn on the radio and light
at the preset time, or to ALARM to
sound the alarm buzzer and turn
on the light at the preset time.
When you turn on the alarm, the
alarm indicator appears at the
lower left corner of the display.
2. When the buzzer or radio sounds,
set ON/OFF/AUTO/ALARM to OFF
to turn it off.
Note: You can press SNOOZE to
silence the alarm for about 9 min-
utes. You can repeatedly press
SNOOZE for up to 2 hours. Then
the alarm turns off and sounds
again at the set time.
3. Slide ON/OFF/AUTO/ALARM to
AUTO or ALARM to reset the alarm
to sound at the preset time 24
hours later.
12-1611.fm Page 3 Friday, July 9, 1999 10:31 AM